The composition structure of the Typec female seat includes a first mounting plate, a second mounting plate, a boss sandwiched between the first mounting plate and the second mounting plate, and a plurality of plug pins arranged in parallel with each other, wherein the plug leads The feet include the base plate, the first contact, the second contact, etc., which is the structure of the TypeC charging base. The TypeC charging base is commonly used to meet the requirements of high speed, durability, and practicality.

Typec female seatIn general, the pin specifications of the C-type female socket are: 6P, 12P, 16P, 14P, 24P. Because data transmission and current transmission are connected by these pin terminals, the pins are very important. A piece of data, equivalent to the core of the connector.

At present, the existing c-type waterproof structure on the market usually adopts a 4-axis dispensing system and an inclined dispensing mechanism to automatically dispense glue, and then the robot automatically puts the dispensed product into the carrier (the carrier must have a structure that fixes the position of the tongue) , to prevent the tongue from tilting after baking), the carrier is automatically collected, and then the carrier filled with materials is manually sent into the oven, and after it is baked, it is taken out for the next process. The above actions are completed at the same time in a single cycle, and the above actions can be repeated. Realize the automatic operation of the equipment. This waterproof structure needs to go through the process of dispensing and baking, which is complicated and inefficient, and at the same time leads to increased costs. Therefore, there is a need for a Typec socket with less process, low cost and waterproof function in the market.

Typec female connectors also have a variety of pad specifications, such as 6p, 8p, 14p, 16p, 24p, etc. Such as front plug-in, 4-pin plug-in, countersunk, vertical in-line\/attachment board, etc. However, even if the external The specifications are ever-changing, and the conductive structure of the Typec socket is the same. The structure of the Typec socket is the same as that of the micro usb connector. The pins of the Typec socket are essentially "high-conductivity copper sheets", there are several p on the two sides, and the real elasticity The pins are inside the c-type male header. However, due to the elastic parts inside the cTypec female socket, the product pins cannot be designed to be embedded as a whole. When the product data is turned on or the charging function is abnormal, the quality inspector can replace another data first. Line inspection, so as to eliminate the problem of whether it is a Typec female seat, which can effectively improve the inspection efficiency of finished products!